Unlike Windows 10, where you can reset your account ID over the Internet, Windows 7 only allows local accounts that are not connected to the Internet. In this article, we will describe methods for resetting a password on Windows 7. Standard methods for resetting a password require using pre-recorded reset data on a floppy disk or flash drive; we will not consider them, since almost no one makes a backup of the password. Unlike most articles where you need to perform actions with the registry or enter long commands into the command line, we will describe it in simpler and easier ways. These methods are suitable for any computer and will also be relevant on a laptop (with Secure Boot preferably disabled).
How to reset a user account password on a Windows 7 computer if you have access to the system
Option 1, let’s say you have 2 accounts on your computer with administrator rights, and you have lost access to one of them. The main feature is the Administrator rights on the account from which the recovery will be performed. If you do not have Administrator rights, proceed to the next option.
Follow these steps:
- Try logging into your profile with a new password (or without it).
As we can see, there is nothing complicated, but if there is no access to the system, this complicates this situation a little, so we move on to the next option.
How to recover a password on a Windows 7 computer without access to the system
2nd option, to access the command line, we need to access the system data, but we cannot log in, so we will need Windows installation media (Windows 7, 8 or 10 doesn't matter) Live CD, to access the environment recovery.
Previously, there was a way to perform a restore without installation media, but the problem was fixed with system updates. Only a small part of users still have this option, so we will not consider it.
Procedure:
- Boot from installation media or Live CD
- Select System Restore
- Open Command Prompt
- We are greeted by a command line sent to X:\Sources - this is data from the installation media. To access system data, type notepad and press Enter.
- Notepad will open, where you need to click File - Open
- Explorer will open, where we need to set the File type to All files and go to the system drive, in the case of the example this is the drive marked with the letter D
- We go through Windows - System32 and need to do the following: Find the cmd (Command Line) and osk (On-Screen Keyboard) files and rename them as follows - osk - osk.old and cmd - osk. Thus, we will replace the On-Screen Keyboard with the Command Prompt, which can be called through the login window.
- We restart the computer and get to the login screen. In the lower left corner, click on the Accessibility button and check the box for Entering text without a keyboard (on-screen keyboard) and click OK.
- A Command Prompt window will open.
- Now we repeat the points from the previous version:
Net user [name] “”
How to reset Windows 7 administrator password
On Windows, it is possible to enable the built-in administrator account with the following command:
Net user Administrator /active:yes
This command can be entered at point 10 of the 2nd stage, then in addition to the user profile, the Administrator profile will also appear.
In some cases, it may already have a specified password. Therefore, if you were wondering how to recover the administrator password on Windows 7, then the following commands will help you:
Net user Administrator (Administrator for English version)
Net user Administrator (Administrator for English version) “”
Have a great day!
You can use the command netplwiz, inscribed in the line of the “Run” utility. To enter there directly”, press the keyboard shortcut Win+F.
Hello everyone, on the blog there is a topic about correcting your mistake when installing Windows 7 OS. Yes, I think so, because sometimes with our ignorance we complicate our lives. As in this case with assigning a password when installing Windows.
So we need to follow the path: Start - Run and enter the above command and click OK. But in some builds of windouws 7 it is not so easy to find, but you need to follow the Start button further: All programs - Standard - Run - netplwiz.
A window like this should appear on your desktop: 
Now after a reboot, when you log in, the computer will no longer require you to enter a password. But if you block for something using a keyboard shortcut Win+L, then as a result you will have to remember your password again and enter it in the login line.
Therefore, to avoid such “hemorrhoids”, remove it completely. To do this, we follow the path: Start - Control Panel - User Accounts - Delete (change) your account password.
By selecting the “Delete your password” item, we find ourselves in the next window where we confirm that we want to delete the current password. 
Many users, in order to protect their information from prying eyes, set an administrator password for their Windows account. Some people, for various reasons, forget the set security code and to reset windows password carry out the procedure of reinstalling the entire system. And as you know, this matter takes a relatively long time.
There may also be problems with saving the necessary files, because we cannot log into the system, and when installing Windows, as we know, the local disk on which the operating system will be installed must be formatted. Well, of course, you can always find a simpler solution to the problem, this is exactly what will be discussed in this article and you will learn how reset password in windows 7 without resorting to reinstallation.
The only complication is that we will need an installation disk or flash drive to work on the command line. If you don't have either of these on hand, you can always use your neighbor's computer to download the image and burn it to a disk or flash drive.
How to reset windows 7 password if it is forgotten
A loophole for resetting password protection in Windows 7 turned out to be the Sticky Keys mode, which is caused by pressing a key five times Shift, This is exactly what will help us bypass the security code we have forgotten. The essence of the procedure is that when you call the sticky mode, a command line window will open in which we will need to work. Read below on how to do this.
First you need to boot from the installation disk or flash drive. In the first window, click next.
In the next window we are interested in the System Restore item, click on it.
If you have several operating systems installed, the list will show all available ones, select the one you need and move on.
In the System Recovery Options window, open the Command Prompt.
Enter the command:
- copy D:\Windows\System32\sethc.exe D:\ and press enter.
sethc.exe- a file that causes sticky mode by pressing the key five times shift.
Using this command, this file is copied to the root of the disk (D:\) (in the system it is the drive (C:\)).
- copy D:\Windows\System32\cmd.exe D:\Windows\System32\sethc.exe
cmd.exe- the file responsible for calling the command line.
With this command we replace the file sethc.exe with cmd.exe. Confirm changes by entering a key "y".
In the password entry window, call the command line by pressing the key five times shift.
Enter the command: net user Andrey 54321 and confirm it by pressing enter.
- net user - user selection function.
- Andrey - account name (enter yours).
- 54321 is the new password.
After successfully completing the procedure, enter the changed password and rejoice.
Replace the command line back with Sticky Keys
If you are not interested in the sticky mode, then you can leave everything as is. To return to calling this mode, read on.
As you can see in the picture below, using the commands entered above, the file sethc.exe moved to the root of the disk. And in the system folder system32, it has been replaced by the command line. Now we need to move it back. You can try just moving it to system32 and delete the false file located there. But it may not be possible to do this due to insufficient rights. Therefore, we will use the command line.
Open the start menu, enter in the search cmd and run the found file as administrator .
Enter the command:
- copy C:\sethc.exe C:\Windows\System32\sethc.exe
Press enter and confirm with the " key" y". If everything was done correctly when pressing the key five times shift again the sticking mode will open .
ABOUTGive your opinion about this article, and of course, ask your questions if something suddenly goes wrong for you.
Thank you for your attention!
Passwords help protect your account in operating systems from unauthorized users. However, it also happens that they are forgotten, and it is not possible to get into the system from an administrator account, and you don’t have the installation media with you. In this case, you will have to reset the password using slightly non-standard methods.
Removing the password from Windows 7 without installation media
If you are unable to download a password reset disk for Windows 7, you can use one of the methods suggested below. Both involve solving the problem using system utilities. To do this, you do not need to download a Windows 7 password reset disk or a full system image. However, it is recommended to strictly follow the instructions, since both methods involve working with the interface "Consoles".
There is no need to try to reset your Windows 7 password using third-party software, as this will lead to certain problems.
Method 1: Command Line
This is the most universal, simple and secure way to change your Windows 7 password without knowing the old one. If necessary, you can later simply remove the new password from the operating system. To perform this method, you will need to be able to log into the OS interface, even from a guest account. Usually this is always there by default.
The Guest account has some limitations compared to the Administrator account. By default, they apply to making any changes to the OS, for example, installing/uninstalling programs, editing some documents, downloading content from the network. Restrictions on use "Command line" no by default.
The instructions for this method are as follows:
- Press the key combination Win+R.
- In the line that opens, enter cmd and click Enter.
- Will start "Command line". First, you need to find out the number of users, their powers and logins in the operating system. To do this, enter the command net user and click Enter.
- A list of all operating system users is displayed. You need to find the administrator account login. This will be easy to do if there are only two accounts in the OS.
- Now write the command net user administrator_login new_password. Example command: net user Admin 123456. Press Enter.
- After applying the command, restart your computer and log into the administrator account with a new password.
Method 2: Recovery Menu
This method can be dangerous, as it involves disconnecting the computer from power while it is running. However, a single use should not cause much harm.
The bottom line is this:
- Restart your computer if it was turned on or turn it on if it was turned off.
- When Windows starts loading, turn it off abruptly. For example, press the power button or unplug the power cable.
- Then reconnect the power and turn on the PC.
- Instead of the standard Windows startup, the screen should start "Windows Error Recovery", that is, recovery from an error.
- You will be offered several options for starting the operating system. Select "Launch Startup Repair". In the Russian version it may be called "Run boot repair".
- The system will begin loading. You may see a window asking for permission to perform a system restore procedure ( "System Restore"). Cancel by clicking on "Cancel".
- A recovery error message appears. Click on the item "View problem details".
- A text file describing the problem will open. Here you need to click on the item "File" in the top menu. From the drop-down list, click on the item "Open".
- Will open "Conductor" Windows with access to all system files. You need to go to the following path: C:\Windows\System32.
- Here, find and rename one of these files utilman.exe or sethc.exe, adding the postscript bak or old to the name of one of them. If these files are not displayed in Explorer, then in the column "File Type" set the value "All files".
- Now find the cmd.exe file. Copy it and paste it in the same directory.
- Rename the copied file to "utilman" or "sethc". No need to rename the file to "utilman", if in step 10 you added a postscript to the file "sethc" and vice versa.
- You can close "Notebook" and press "Finish". After this, the system will reboot.
- Wait for the Windows start screen to load and click on the icon "Special abilities", if you renamed the file to "utilman". If you renamed it to "sethc", then you will need to press the key five times Shift.
This way you will have access to "Command line" without having any access to the system. In the interface "Consoles" you will have to do the following:
- If you do not know the exact name of the administrator account, then enter the command net user. It will display all data regarding system users, including their status.
- Now write this command: net user Administrator account name new password. Example command, net user Admin 123456. Press Enter.
- Restart your computer and try logging in with the new password you set.
The methods discussed above help you reset your password on Windows 7 without using a disk with an OS image. However, it is recommended to create a system recovery image on a flash drive (installation disk) and perform a reset through it.
Good day, dear readers, Denis Trishkin is in touch again.
In the latest versions of operating systems from Microsoft, for security purposes, it is possible to set a password to enter the work area. If this tool is no longer relevant, you can disable it. I will tell you how to remove the password in Windows 7 in several ways. After all, constantly entering secret characters sooner or later gets boring. This is especially irrelevant when only one person is working at the computer.
Many users store information on their computer that only they should have access to. If only one person uses the device, this is not a problem. But in the case when another may approach him, certain difficulties may arise.
Windows provides a special tool that restricts access to data by setting a personal key. For example, parents often use this tool to prevent their children from seeing content they are not supposed to see. In addition, this way you can protect yourself from changing your personal settings.
Disable password( )
There are several ways to turn off key entry. Each of them assumes that you are the owner of the account that needs to be updated. The first means that the password is known and the user has administrator rights.
It allows you to quickly deal with this problem:
That's all. Now, when the system starts, you will not be prompted to enter a secret key.
Important! However, if you change your account or go to the lock screen, you will still need to enter your password.
You can remove the annoying function using the standard menu “ User Accounts" True, in this way it will not be a shutdown, but a complete deletion. Despite this, Password will not be asked under any circumstances, even after resuming from sleep mode.
To disable the protection tool, do the following:
That's it, now the system will not ask “stupid questions” regarding security in this area.
Here you can also create a secret combination of symbols.
Interesting to know! When installing a key, experts recommend entering large and small letters in different languages and also adding numbers. The length must be at least six characters. Only in this option can at least some security be guaranteed.
Resetting the network key( )
Probably all computer users know what a network is. It is a connection between two or more devices that allows the exchange of information. The younger generation is familiar with this concept, as games can be played together through this method.
But what should you do if, after connecting the machines, a window appears to enter the network password? Moreover, if it does not exist, confirming an empty string will not lead to the desired result.
The fact is that Windows 7 provides new security tools, and therefore several conditions must be met to log in:
Use classic settings on all devices.
If all this is done, then you will not need to enter secret characters.
Resetting the administrator password( )
Sometimes situations happen when, under some circumstances, you simply forgot the password with which you can get to your desktop, and generally gain access to personal data. This often happens when a user constantly works on multiple devices. And if the passwords on them are not written down anywhere, then it is quite possible to confuse them.
There are several solutions. The first thing you can do is spend some time on selection. Alternatively, simply remove the system from your computer and install a new one. But in this case, the data that was on the system disk will be lost. And it’s not a fact that they can be restored, although methods exist.
But there is a safer way - a bypass, which I want to talk about. To do this, you will need an installation disk or USB flash drive with Windows. It is important to note that the operating system must be exactly the same. For example, if the Ultimate version is installed, then the same is true on a portable device.
So, if everything is found and prepared, you can proceed:
We insert the flash drive or disk into the computer and reboot to start from it. To do this, you need to set the appropriate settings in the BIOS.
Below we find " System Restore».
A window will appear in which we need " Command line».
increase
In it we write “ regedit" and confirm the actions.
The registry window appears. We need a branch " HKEY_LOCAL_MACHINE».
We go to the system drive (most often this is C:\). Next we go to the directory “ Windows\system32\config\" and select the file " system».
A small menu appears in which you need to enter the name of the new section. It can be anything. Let it be 3333.
On the right side, open the parameter “ CmdLine", where we enter "cmd.exe" and confirm.
After that, select “ Setup Type", where we enter " 2 ».
Now select the newly created section “ 3333 ».
Let's go to " File" And " Unload bush».
We take out the portable device, close all windows and reboot using system restore.
After the work has been done, a command line will appear while the OS is loading. Here we can change the password. To do this, enter in the line “ net user user password" We confirm the action. Example command: " net user admin 1111».
In this way we changed the password for the user " admin" on " 1111 " Now, in the window provided, we enter our treasured numbers and wait for the download.
Password reset via SAM file( )
There are many ways to bypass the login security system. Despite this, they all only change the information that is stored in the SAM file. It contains all the necessary data related to User-Password links.
It is worth noting that this file does not have a special extension. The fact is that it is a registry component. It can be found in the folder " Windows\system32\config", which is located on the system disk.
It is also important to note that this method is considered one of the most difficult. Nevertheless, I consider it necessary to tell it to you. To work we need a special program. At the same time, each step must be performed with extreme caution, because this can radically change the entire process.
We will use Active password changer. In addition, we will need a clean flash drive.
So, to remove the password prompt, you need to:
If everything goes as it should, no problems should arise in the future, since only the components we need are changed in the system area.
The only downside is that some relatively older motherboards may not support starting with portable memory. In this case, you can use a plastic disk.
Well, as you can see, there are several different ways to remove or change your account password. At the same time, they are absolutely simple, you don’t even need to watch the video. By strictly following the instructions, everyone will be able to gain access to the necessary information.
I hope everyone here will find an option that will help them cope with the problem. Subscribe and tell your friends about me!